Tightens in MINUTES, restores pin block permanently, preserves and protects wood, remains dry, tune within hour - 20 minutes in many cases, and also tightens instantly many action parts, cases, benches, and stripped screw holes.
1. Apply slowly to top of tuning pin AS MUCH AS WOOD WILL ABSORB. Avoiding spilling. Most pianos require one application. Place uprights on back or tilt 45 degrees. Start at center treating 15-20 pins, then check back. If PIN-TITE is absorbed, add more until no more penetrates. Avoid fast application to prevent getting on strings, soundboard or action.
2. Tune immediately, or as soon as pitch will hold. 20 minutes to an hour is adequate for most pianos, except when other products have been used. Then more time and PIN-TITE may be needed to neutralize them.
3. Also tightens instantly loose screw holes, action parts and similar joints without regluing or removing.
Keep Bottle Capped
Article courtesy Gemm Piano Supply
© Copyright material is presented for viewing purposes only, and is not intended for copying or publication.